|
| |
Personal Care | Products |
|
| |
|
| |
|
|
Products |
| |
|
|
|
| |
Fluoroaliphatic Betaine Fluorosurfactant |
| |
| |
MASURF
FS-1520 is characterized as a 20% active fluoroaliphatic betaine fluorosurfactant
in a water/propylene glycol solution. With typical use levels of 50-500ppm,
MASURF FS-1520 is effective at very low concentrations, and together
with traditional hydrocarbon surfactants, can contribute properties
not possible with either material alone.
MASURF FS-1520 is a very effective at reducing surface tension, in
aqueous acids, bases and polar solvents. FS-1520 is high foaming amphoteric
fluorosurfactant with high hard water tolerance, contributing exceptional
foaming, wetting, spreading and leveling properties to a wide range
of systems.
MASURF FS-1520 is a very effective at reducing surface tension, in
aqueous acids, bases and polar solvents. FS-1520 is high foaming amphoteric
fluorosurfactant with high hard water tolerance, contributing exceptional
foaming, wetting, spreading and leveling properties to a wide range
of systems.
In Personal Care applications, MASURF
FS-1520 is a performance additive in Hair Conditioner and Rinse formulations.
Compare to Zonyl** FSK.
INCI Name: Polytetrafluoroethylene
Acetoxypropyl Betaine
|
| Typical Properties |
| Physical form |
Light amber liq., w/ mild amine/glycol odor |
| Actives content % |
19.5 wt% minimum |
| Aqueous surface tension @25°C dynes/cm |
32@0.001%, 17@0.1%, 17 lowest |
| Interfacial tension (0.1%aq./cyclohexane) |
9 dynes/cm |
| Specific gravity @25°C |
1.12±0.04 |
| pH |
8.0±1.5 |
| Viscosity @25°C |
<100 cps |
| VOC content (volatile-water) |
20% ((Propylene glycol) |
| Storage |
Store above 32°F and below 100°F |
|
| Handling Information |
Refer
to the Material Safety Data Sheet (MSDS) available from Mason Chemical
Company for information on the safe use, handling and disposal of
this product.
MASURF FS-1520 is a 20% active fluoroaliphatic betaine fluorosurfactant
in a water/propylene glycol solution. FS-1520 is an effective wetting
and interfacial tension reducing agent. The formulations below illustrate
this effect.
| Hair Conditioner |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| Maquat
CETAC-30% (1) |
3.0 |
| Cetyl alcohol |
3.0 |
| Stearyl alcohol |
1.0 |
| Ceteareth-20 |
0.5 |
| Masurf
FS-1520 |
0.015 |
| Fragrance |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Mix water and CETAC-30%,
heat to 65°C. |
| Add Cetyl/Stearyl alcohols,
and Ceteareth-20, heat to 75°C and hold for
30 minutes. |
| Cool to 45°C, add
Masurf FS-1520, Fragrance and Preservative. |
|
| (1) Cetrimonium chloride |
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quat is the active ingredient.
The addition of very small amounts of MASURF FS-1520 significantly
improves wet comb performance of this formula, and others of it's
type, especially on damaged hair.
| Furniture
Polish |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| T-Maz-80(1) |
0.03 |
| S-Maz-80(1) |
0.9 |
| Ethomeen 18/60(4) |
0.15 |
| Masurf
FS-1520 |
0.05 |
| Carbopol ETD-2050(2) |
0.05 |
| Drakesol 165 Oil(3) |
3.0 |
| Masil SF-500(1) |
2.0 |
| Potassium hydroxide, 45% |
0.07 |
| Fragrance |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Add T-Maz-80, S-Maz-80,
Ethomeen 18/60 and Masurf FS-1520 to water with
mild agitation. Sift in Carbopol ETD-2050. Mix until
uniform. |
| Combine Drakesol 165
and Masil SF-500 then add to water/emulsifier mixture
with agitation. |
| Slowly add diluted KOH,
45% to activate thickener. |
| Add Fragrance and Preservative. |
|
(1) BASF Corporation
(2) BF Goodrich Company
(3) Penreco
(4) Akzo |
MASURF FS-1520 Furniture Polish is a low cost, stable, single vessel
formulation that does not require homogenization. The addition of
very small amounts of MASURF FS-1520 significantly improves the gloss
and rub-out performance of this formula. MASURF FS-1520 is very efficient
and effective at lowering interfacial tension to change microemulsion
performance characteristics in this formula and others.
Masurf FS-Fluorosurfactant evaluation guidelines
Masurf FS-Fluorosurfactants are effective at very low concentrations,
typically 50-500 ppm, and can act synergistically with hydrocarbon
and/or silicone surfactants. Evaluate in aqueous formulations at 0.1%
active Masurf FS-Fluorosurfactant initially, then optimize by successively
reducing the FS concentration
by ½.
Masurf FS-Fluorosurfactants and Masurf FP-Fluoropolymers do not contain
PFOS/PFOA. Masurf FS and FP products are manufactured with telomerization
process fluoroaliphatic intermediates that do not contain, release
or have been shown to degrade to perfluorooctane sulfonate (PFOS)
or perfluorooctanoic acid (PFOA). |
|
|
|
| |
|
|
|
| |
MAC V.010504 |
|
|
|
| |
| |
|
