Search    






  Personal Care   |   Products  
   
 
Mason® CS 445C/CS 525C
  Products
   
 
 
 


Dialkyldimethyl Ammonium Carbonates
 
 
MASON CS 445C is a 50% active didecyldimethyl and MASON CS 525C is a 50% active didodecyldimethyl ammonium carbonate/bicarbonate in a water/methanol solution, for use in EPA unregistered applications.

Cationic surfactants have a multitude of uses. MASON CS 445C/CS 525C are unique quaternary ammonium compounds that does not contain metal corroding halogens such as chloride or bromide. CS 445C/CS 525C are manufactured from a renewable resource alkyl amine derived from coconut oil and dimethyl carbonate, a biodegradable “green reagent.”

Use MASON CS 445C/CS 525C as non-corrosive cationic emulsifiers in
Marine Coatings, a bio-mass dispersant with unique solubility parameters in Oil Field applications. Mix CS 445C/CS 525C with weak organic acids to enhance performance in aqueous or non-aqueous systems through an in-situ replacement of the counter-ion. The unique hard water tolerance of MASON CS 445C/CS 525C imparts differentiated performance in formulated aqueous products.

Typical Properties
  CS 445C CS 525C
Water solubility
Complete
Complete
Physical form
Liquid
Liquid
Actives quaternary
50.0% Minimum
45.0% Minimum
Free Amine
1.5% Maximum
1.5% Maximum
Color
Colorless to light yellow
Colorless to light yellow
Specific gravity @25°C
0.93±0.04
0.98±0.04
Viscosity @25°C (Brookfield)
<500cps
<500cps
pH, 10% aq
8±2
8±2
Flash point (PMCC)
140 ° F(60 ° C)
73 ° F(23 ° C)
RVOC, U.S. EPA, %
4.5-5.0 (Methanol)
35-45 (Methanol)

Handling Information

Refer to the Material Safety Data Sheet (MSDS) available from Mason Chemical Company for information on the safe use, handling and disposal of this product.

Mason CS 445C is an effective fragrance solubilizer and grease cutter in deodorizer formulations that does not contain metal corroding halogens such as chloride or bromide. The following formulations illustrate this performance:

 
"Aviation" Deodorizer Concentrate
Ingredients: Wt.%
Aqueous Phase
Water 64.50
Mason CS 445C 20.00
Isopropyl Alcohol 4.00
Acid Blue #9 0.75
Fragrance/Oil Phase
Citronella Oil 3.00
d-Limonene 3.00
Ethyleneglycol monophenylether .75
Procedure:
Mix ingredients thoroughly in order listed. Add pre-mixed oil phase to pre-mixed aqueous phase.
Components should mix "clear" in all proportions.
Dilute 1 ounce concentrate per gallon of water.

Natural Citronella and d-Limonene are safe and effective deodorizer ingredients in this formulation.

Effective Ready-to-Use Deodorizer
Ingredients: Wt.%
Aqueous Phase
Water 94.0
Mason CS 445C 0.6
Isopropyl Alcohol
3.0
Solvent Phase
Surfonic N95 1.0
Isopropyl Alcohol 1.0
Fragrance 0.4
Procedure:
Mix ingredients thoroughly in order listed. Add pre-mixed oil phase to pre-mixed aqueous phase.
Components should mix "clear" in all proportions. If necessary, increase N95 by 0.5% increments to solubilize fragrances for clear solutions.
Use "as is."
 

Spray directly on odor causing soils as a cleaning pre-step or as an ongoing odor control product.

While MASON CS 445C/CS 525C are slightly toxic orally, they cause severe skin and extreme eye irritation. As with all chemicals, use with care and caution. Avoid contact with eyes and skin, and use eye protection (goggles), gloves and protective clothing.

 
       
  MAC V.102304    
 
 
 
Copyright 2007 Mason Chemical Company Legal Notices