| |
| Hair Conditioner |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| Maquat
CETAC-30% (1) |
3.0 |
| Cetyl alcohol |
3.0 |
| Stearyl alcohol |
1.0 |
| Ceteareth-20 |
0.5 |
| Masurf
FS-330 |
0.015 |
| Fragrance |
q.s |
| Preservative |
q.s. |
| Procedure: |
| Mix water and CETAC-30%, heat to
65°C. |
| Add Cetyl/Stearyl alcohols, and Ceteareth-20,
heat to 75°C and hold for 30 minutes. |
| Cool to 45°C, add Masurf FS-330, Fragrance
and Preservative. |
|
| |
| (1) Cetrimonium chloride |
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quat is the active ingredient.
The addition of very small amounts of MASURF FS-330 significantly
improves wet comb performance of this formula, and others of it's
type, especially on damaged hair.
| Conditioning
Shampoo |
| Ingredients: |
Wt.% |
| Water |
28.0 |
| Macat
Ultra CDO |
35.0 |
| Macat
AO-14 |
35.0 |
| Maquat
SC18 - 25% |
1.5 |
| Citric acid |
q.s. |
| Ammonium Sulfate |
0.5 |
| Sodium Citrate |
q.s. |
Dye, Fragrance & Preservative
|
q.s. |
| Notes: |
| Mix first 4 components, heat to 100-120°F.
Adjust pH w/Citric acid to 6-7. Cool, adjust viscosity
w/Ammonium sulfate, sodium citrate. Add remaining ingredients. |
| Maquat SC18 contributes rich conditioning
properties. Macat Ultra CDO, Macat AO-14 contributes high
lathering foam with conditioning properties. |
| Moisturizing
Hair Conditioner |
| Ingredients: |
Wt.% |
| Part A |
| Water |
to 100.00 |
| Maquat
CETAC - 30% |
0.3 |
| Part B |
| Cetearyl alcohol |
1.5 |
| Maquat
BTMC-85% |
1.2 |
| Part C |
| Fragrance |
q.s |
| Extracts/Oils |
q.s |
| Preservative |
q.s |
| Procedure: |
| Part A: Mix water and CETAC-30%, heat
to 65°C. |
| Part B: Mix Cetearyl alcohol, and
Maquat BTMC-85%, heat to 65°C. |
| Mix Part B into Part A, and hold for
30 minutes, Cool to 45°C, add Part C. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
| Detangling Hair
Conditioner |
| Ingredients: |
Wt.% |
| Part A |
| Water |
to 100.00 |
| Maquat
CETAC-30% |
0.5 |
| Part B |
| Cetearyl alcohol |
2.5 |
| Maquat
BTMC-85% |
2.0 |
| Amodimethicone |
1.0 |
| C13-14 Isoparaffin |
1.0 |
| Part C |
| Propylene glycol |
1.0 |
| Fragrance |
q.s |
| Extracts/Oils |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Part A: Mix water and CETAC-30%, heat
to 65°C. |
| Part B: Mix components, heat to 65°C. |
| Mix Part B into Part A, and hold for
30 minutes, Cool to 45°C, add Part C. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quaternium ammonium salt is the
active ingredient. The conditioning quat, along with the fatty alcohols
impart wet-comb performance to the formulation. The superior substantive
properties of Maquat BTMC-85% over other conditioning cationics significantly
improves wet comb performance of these formulas, and others of their
type, especially on damaged hair.
| Rejuvinating
Shampoo for Damaged Hair |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Sodium laureth-2 sulfate (26%) |
25.0 |
| Sodium lauryl sulfate (28%) |
25.0 |
| Macat
Ultra CG |
5.0 |
| Maquat
SL-5 |
2.5 |
| Fragrance |
q.s. |
| Extracts/Oils |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Charge materials into water with agitation
in order. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
| Detangling Hair
Conditioner for Damaged Hair |
| Ingredients: |
Wt.% |
| Part A |
| Water |
to 100.00 |
| Maquat
CETAC-30% |
0.5 |
| Maquat
SL-5 |
1.5 |
| Part B |
| Cetearyl alcohol |
2.5 |
| Maquat
BTMC-85% |
2.0 |
| Masurf
LL |
1.0 |
| C13-14 Isoparaffin |
1.0 |
| Part C |
| Propylene glycol |
1.0 |
| Fragrance |
q.s |
| Extracts/Oils |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Part A: Mix water and CETAC-30% and
SL-5, heat to 65°C. |
| Part B: Mix components, heat to 65°C. |
| Mix Part B into Part A, and hold for
30 minutes, Cool to 45°C, add Part C. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quaternium ammonium salt is the
active ingredient. The conditioning quat, along with the fatty alcohols
impart wet-comb performance to the formulation. The superior substantive
and lubricating properties of Maquat SL-5 over other conditioning
cationics significantly improves wet comb performance of these formulas,
and others of their type, especially on damaged hair.
| Easy to Formulate
Hair Conditioner |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Maquat
SC1632 |
5.0 |
| Citric acid |
q.s. |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Heat water to 150-160°F (65-70°C). With
sufficient agitation, add SC1632 to form a uniform dispersion.
Adjust pH w/Citric acid to 6-7. Cool to room temperture,
add remaining ingredients. |
| Maquat SC1632 contributes rich conditioning
properties with excellent wet comb performance. |
| Moisturizing
Skin Lotion |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Maquat
SC1632 |
5.0 |
| Propylene glycol |
2.0 |
| Masurf
LL |
2.0 |
| Petrolatum |
1.0 |
| Titanium dioxide |
0.2 |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Heat water to 150-160°F (65-70°C). With
sufficient agitation, add SC1632 to form a uniform dispersion.
Adjust pH w/Citric acid to 6-7. Cool to room temperture,
adding remaining ingredients. |
| Self emulsifing Maquat SC1632 contributes
conditioning properties, with Masurf LL contributing silky
skin feel. |
| Detangling Hair
Conditioner |
| Ingredients: |
Wt.% |
| Part A |
| Water |
to 100.00 |
| Maquat
CETAC-30% |
0.5 |
| Part B |
| Cetearyl alcohol |
2.5 |
| Maquat
BTMC-85% |
2.0 |
| Masurf
LL |
1.0 |
| Petrolatum |
1.0 |
| Part C |
| Propylene glycol |
1.0 |
| Fragrance |
q.s |
| Extracts/Oils |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Part A: Mix water and CETAC-30%, heat
to 65°C. |
| Part B: Mix components, heat to 65°C. |
| Mix Part B into Part A, and hold for
30 minutes, Cool to 45°C, add Part C. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
Damaged hair, especially permed hair can be difficult to comb, especially
when wet. Hair Conditioner products are generally oil-in-water emulsions
in which the lipophilic conditioning quaternium ammonium salt is the
active ingredient. The conditioning quat, along with the fatty alcohols
impart wet-comb performance to the formulation. The superior substantive
properties of Maquat BTMC-85% over other conditioning cationics significantly
improves wet comb performance of these formulas, and others of their
type, especially on damaged hair.
| Mild Commercial
Strength Hand Soap |
| Ingredients: |
Wt.% |
| Water |
79.07 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
R-4 (1) |
0.5 |
| Macat
AO-12 |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| Macat AO-12 is an effective foam booster
in this pH neutral, mild hand soap. |
| (1) PEG-4 Rapeseedamide |
| (2) Added oily soil release |
| (3) Adjust pH to skin mild 6-7 |
| (4) Build viscosity |
| Low pH Conditioning
Shampoo for Damaged Hair |
| Ingredients: |
Wt.% |
| Water |
55.0 |
| Ammonium Lauryl Sulfate, 30% |
40.0 |
| Macat
Ultra CDO |
5.0 |
| Citric acid |
to pH 4-5 |
| Sodium Chloride |
to max viscosity |
| Dyes, Fragrance, Etc. |
q.s. |
| Notes: |
| Mix in order listed. |
| Clear shampoo at pH 4-5 with initial viscosity
of 5,100 cps, building to 16,500 cps with 0.4% salt. By
comparison, Lauramine oxide yields a low viscosity cloudy
solution. |
| Mild Commercial
Strength Hand Soap |
| Ingredients: |
Wt.% |
| Water |
79.07 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
R-4 (1) |
0.5 |
| Macat
Ultra CDO |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (5) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| Macat ULTRA CDO is an effective foam booster
in this pH neutral, mild hand soap. |
| (1) PEG-4 Rapeseedamide |
| (2) Added oily soil release |
| (3) Adjust pH to skin mild 6-7 |
| (4) Build viscosity |
|
| Mild Commercial
Strength Hand Soap |
| Ingredients: |
Wt.% |
| Water |
75.77 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
CO (1) |
2.5 |
| Oleic Acid |
1.3 |
| Macat
AO-12 |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
Masamide CO-Extra is an effective grease
cutter and emulsifier in this effective, yet mild hand
cleanser.
| (1) Cocamide DEA |
| (2) Added oily soil release |
| (3) Adjust pH to skin mild
6-7 |
| (4) Build viscosity |
|
| Conditioning
Shampoo |
| Ingredients: |
Wt.% |
| Water |
28.0 |
| Macat
Ultra CDO |
35.0 |
| Macat
AO-14 |
35.0 |
| Maquat
SC18 - 25% |
1.5 |
| Citric acid |
q.s. |
| Ammonium Sulfate |
0.5 |
| Sodium Citrate |
q.s. |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Mix first 4 components, heat to 100-120°F.
Adjust pH w/Citric acid to 6-7. Cool, adjust viscosity
w/Ammonium sulfate, sodium citrate. Add remaining ingredients. |
| Macat AO-14 contributes high lathering
foam with conditioning properties. |
| Premium Conditioner |
| Ingredients: |
Wt.% |
| Macat
AO-14 |
20.0 |
| Maquat
CETAC-30% |
10.0 |
| DEA-Oleth-3-Phosphate |
4.0 |
| Masurf
FS-425 |
0.005 |
| Water |
q.s. to 100.0 |
| Citric acid |
q.s. |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Pre-Mix first 4 components, heat to 100-120°F,
add to Water. Adjust pH w/Citric acid to 6-7. Cool, add
remaining ingredients. |
| Macat AO-14 contributes wetting and conditioning.
Very small additions of Masurf FS-425 significantly improves
wet comb performance. |
| Mild Degreasing
Hand Soap |
| Ingredients: |
Wt.% |
| Water |
|
| Macat AEC-126 |
5.0 |
| Masamide
R-4 (1) |
0.5 |
| Macat
AO-14 |
1.0 |
| Diethyleneglycol butylether(2) |
1.0 |
| Citric acid(3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| (1) PEG-4 Rapeseedamide |
| (2) Additional oily soil release |
| (3) Adjust pH to skin mild 6-7 |
| (4) Build viscosity |
| Clear Conditioning
Shampoo |
|
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| Sodium laureth-2 sulfate (28%) |
10.0 |
| Macat AEC-126 |
2.5 |
| Macat
Ultra CG |
3.0 |
| Masurf
G-2C |
2.0 |
| Maquat BPGTMC |
1.0 |
| Citric acid |
for pH 6-6.5 |
| Fragrance |
q.s. |
| Extracts/Oils |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Charge materials into water with agitation
in order listed. |
| Adjust pH to 6-6.5. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
| Adjust viscosity with sodium chloride. |
|
| 2 in 1 Shampoo
+ Conditioner |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| Ammonium laureth-2 sulfate
(28%) |
10.0 |
| Ammonium lauryl sulfate |
2.5 |
| Glycol Distearate |
2.0 |
| Maquat PQ-125 (1) |
1.0 |
| Masamide
R-4 (2) |
1.0 |
| Maquat
SL-5 (3) |
0.5 |
| Citric acid |
to pH 6-6.5 |
| Sodium Chloride |
q.s. |
| Fragrance/Extracts/Oils/Preservative |
q.s. |
| Procedure: |
| Charge materials into water with agitation
in order listed. |
| Adjust pH to 6-6.5. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Panthenol and Jojoba, and Preservative. |
| Adjust viscosity with sodium chloride. |
|
| Economical Shampoo |
| Ingredients: |
Wt.% |
| Water |
78.07 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Macat
Ultra CG |
2.0 |
| Masamide
CO (1) |
1.5 |
| Citric acid (2) |
0.08 |
| Ammonium Sulfate (3) |
0.35 |
| Sodium Citrate (3) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
Masamide CO is an effective foam booster
in this pH neutral, mild shampoo.
| (1) Cocamide DEA |
| (2) Adjust pH to skin mild
6-7 |
| (3) Build viscosity |
|
| Flexible Hold
Styling Mousse |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Maquat PQ-125 (1) |
2.0 |
| Macat
Ultra CG (4) |
1.5 |
| Maquat
CETAC-30 (5) |
1.5 |
| Citric acid |
to pH 6-6.5 |
| Fragrance |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Charge materials into water with
agitation in order listed. |
| Adjust pH to 6-6.5. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
|
| Clear Conditioning
Shampoo |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Sodium laureth-2 sulfate (28%) |
10.0 |
| Masurf
Ultra CG |
3.0 |
| Masurf
G-2C |
2.0 |
| Maquat
BTMC-85% |
0.5 |
| Citric acid |
for pH 6-6.5 |
| Fragrance |
q.s |
| Extracts/Oils |
q.s |
| Preservative |
q.s |
| Procedure: |
| Charge materials into water with agitation
in order listed. |
| Adjust pH to 6-6.5 with citric acid. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
| Adjust viscosity with sodium chloride. |
|
Safety/Toxicology/Ecotoxicology/Regulatory
Information
Masurf G-2C is a non-sensitizer (CCET Method), non-mutagenic (OECD
471, TA98, TA100, TA1535, TA1537, TA1538), non-toxic: LD50 >2000 mg/kg
(92/69/ECC), non-irritating for both skin and eye (93/21/CEE, OECD
404, 405), is biodegradable: >60% in 28 days (OECD 301B), and exhibits
low Ecotoxicity: Fish LC50(96 hours) >10mg/L (OECD 203).
Masurf G-2C is found on the complies with the requirements of the
following chemical inventories: US (TSCA, FIFRA), Canada (DSL), Australia
(AICS), Korea (ECL).
See Material Safety Data Sheet for additional information.
| Cleansing Foam |
| Ingredients: |
Wt.% |
| Water |
79.07 |
| Macat
LFB |
10.0 |
| Masurf
G-2C |
1.0 |
| Masamide
R-4 |
0.5 |
| Citric acid |
0.08 |
| Dye, Fragrance, Preservative |
q.s. |
| Note: |
| Mix in order listed. |
| INCI Names: |
| Macat LFB (Capryl/Capramidopropyl Betaine),
Masurf G-2C (Glycereth-2 Cocoate), Masamide R-4 (PEG-4
Rapeseedamide) |
| Conditioning Shampoo |
| Ingredients: |
Wt.% |
| Water |
28.0 |
| Macat Ultra CDO |
35.0 |
| Macat AO-12-2 |
35.0 |
| Maquat SL-5 |
1.5 |
| Citric acid |
q.s. |
| Ammonium Sulfate |
0.5 |
| Sodium Citrate |
q.s. |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Mix first 4 components, heat to 100-120°F. Adjust pH w/Citric acid to 6-7. Cool, adjust viscosity w/Ammonium sulfate, sodium citrate. Add remaining ingredients. |
| Macat AO-12-2 contributes high lathering foam with conditioning properties. |
| Premium Conditioner |
| Ingredients: |
Wt.% |
| Water |
q.s. to 100.0 |
| Macat AO-12-2 |
20.0 |
| Maquat CETAC-30% |
10.0 |
| Masurf FS-1620 |
0.005 |
| Maquat BPGTMC |
4.0 |
| Citric acid |
q.s. |
| Dye, Fragrance & Preservative |
q.s. |
| Notes: |
| Pre-Mix first 4 components, heat to 100-120°F. Add Maquat BPGTMC. Mix until uniform. Cool, adjust pH w/Citric acid to 6-7. Add remaining ingredients. |
| Macat AO-12-2 contributes wetting and conditioning. Very small additions of Masurf FS-1620 significantly improves wet comb performance. |
| |
|
