|
| |
Formulations |
|
| |
|
| |
| Formulations – Cleaning Products |
|
|
|
|
|
| |
|
| |
| Non-Streak Glass
& Window Cleaner |
| Ingredients: |
Wt.% |
| Water |
94.13 |
| Na4EDTA, 38% |
0.1 |
| Macat
AO-12 |
0.4 |
| Glycerin (1) |
0.2 |
| Monoethanolamine (2) |
0.4 |
| Ethyleneglycol monobutyl ether |
0.25 |
| Isopropanol |
4.0 |
| Masurf
FS-230 (3) |
0.02 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| (1) Provides slip for easy wiping. |
| (2) Provides alkalinity for grease cutting
performance. |
| (3) Fluorosurfactant for fast wetting and
non-streak performance. |
| Furniture Polish |
| Ingredients: |
Wt.% |
| Water |
to 100.0 |
| T-Maz-80 (1) |
0.03 |
| S-Maz-80 (1) |
0.9 |
| Ethomeen 18/60 (4) |
0.15 |
| Masurf
FS-330 |
0.05 |
| Carbopol ETD-2050 (2) |
0.05 |
| Drakesol 165 Oil (3) |
3.0 |
| Masil SF-500 (1) |
2.0 |
| Potassium hydroxide, 45% |
0.07 |
| Fragrance |
q.s. |
| Preservative |
q.s. |
| Procedure: |
| Add T-Maz-80, S-Maz-80, Ethomeen
18/60 and Masurf FS-330 to water with mild agitation.
Sift in Carbopol ETD-2050. Mix until uniform. |
| Combine Drakesol 165 and Masil SF-500
then add to water/emulsifier mixture with agitation. |
| Slowly add diluted KOH, 45% to activate
thickener. |
| Add Fragrance and Preservative. |
|
| |
| (1) BASF Corporation |
| (2) BF Goodrich Company |
| (3) Penreco |
| (4) Akzo |
|
MASURF FS-330 Furniture Polish is a low cost, stable, single vessel
formulation that does not require homogenization. The addition of
very small amounts of MASURF FS-330 significantly improves the gloss
and rub-out performance of this formula. MASURF FS-330 is very efficient
and effective at lowering interfacial tension to change microemulsion
performance characteristics in this formula and others.
| Carpet Spotter
/ Bonnet Buff Cleaner |
| Ingredients: |
Wt.% |
| Water |
83.9 |
| Na4EDTA, 38% |
1.0 |
| Ammonium Hydroxide |
0.4 |
| Sodium Lauryl Sulfate, 30% |
6.6 |
| Masurf SP-640 |
4.0 |
| Ethyleneglycol butyl ether |
2.0 |
| Diethyleneglycol butyl ether |
2.0 |
| Masurf FS-710 |
0.1 |
| Dye, Fragrance, Optical Brightener |
q.s. |
| Notes: |
| Mix in order listed. |
When formulated into Carpet Care products, MASURF SP-740 imparts stain block, embrittling and soil anti-redeposition properties, and MASURF FS-710/FS-780 provides improved cleaning performance with an additional anti-resoiling effect.
| 20% Solids High
Gloss Floor Finish |
| Ingredients: |
Wt.% |
| Water |
83.9 |
| Alkali Soluble Resin solution |
12.7 |
| Ammonium Hydroxide |
0.5 |
| Tributoxyethyl phosphate |
2.0 |
| Masurf
FS-710 |
0.2 |
| Zinc Oxide |
0.4 |
| Acrylic Emulsion Polymer solution. |
27.0 |
| Zinc Ammonium Carbonate |
1.7 |
| Ethyleneglycol monoethyl ether |
2.5 |
| Polyethylene Wax Emulsion |
4.8 |
| Polypropylene Wax Emulsion |
4.2 |
| Notes: |
| Mix in order listed through Masurf FS-710,
then slowly add Zinc Oxide until "cut in." Add remaining
components in order listed. |
| Masurf FS-710 is used to "cut in" zinc oxide,
and as wetting/leveling agent. |
When formulated into high performance floor finishes, MASURF FS-710
provides wetting and leveling performance for efficient high gloss
film formation.
| Concentrated
Oven & Grill Cleaner |
| Ingredients: |
Wt.% |
| Water |
77.9 |
| Monoethanolamine |
20.0 |
| Carboxymethyl cellulose |
1.5 |
| Glucopon 425N(1) |
1.5 |
| Masurf
FS-1030 |
0.1 |
| Procedure: |
| Mix ingredients in order listed. |
| Use "as is." |
| |
| (1) Cognis Corporation |
When formulating Hard Surface cleaners, the acronym "TACT" should
be kept in mind: T (Time), A (Agitation), C (Concentration) and T
(Temperature). Leverage any component of TACT for improved cleaning
performance and efficiency. MASURF FS-1030 is effective at reducing
the required contact time (T) by increasing wetting performance and
penetration, and increasing the effective concentration (C) by lowering
the interfacial tension between the detergent surfactants, monoethanolamine
and soil.
Oven & Grill surfaces become encrusted with an impenetrable char of
burned-on organic deposits of fats, oils and particulate food deposits.
MASURF FS-1030 was found to improve the efficiency of the formulation
through faster softening and loosening of the oven & grill deposits
for easy removal.
| Concentrated
Glass/Multi-Surface Cleaner |
| Ingredients: |
Wt.% |
| Water |
46.0 |
| Macat
AO-12 |
3.0 |
| Macat
DOSS-70PG S |
1.0 |
| Ethyleneglycol monobutyl ether (EB) |
10.0 |
| Propyleneglycol methyl ether (PM) |
20.0 |
| Propyleneglycol n-butyl ether (PnB) |
20.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| Dilute 1:1 to 1:20 for desired performance. |
| Drain Cleaner |
| Ingredients: |
Wt.% |
| Water |
69.4 |
| Carboxymethyl cellulose(1) |
2.0 |
| Glycol ether solvent(2) |
10.0 |
| Sodium Thioglycolate(3) |
1.5 |
| Masurf
FS-1030 |
0.1 |
| Sodium Chloride(4) |
15.0 |
| Procedure: |
| Mix ingredients in order listed. |
| Use "as is." |
| (1) Thickener to limit rapid dilution
in standing water |
| (2) Water soluble solvent to aid in grease
and soap scum softening |
| (3) Depilatory for decomposing hair and
proteins |
| (4) Densifier for pouring through standing
water |
|
The performance enhancements that MASURF FS-1030 can bring to a formulation
can allow a formulator the use of less hazardous ingredients without
sacrificing performance. MASURF FS-1030 is very efficient and effective
at increasing wetting performance and penetration, and increasing
the efficiency of cleaning ingredients by lowering the interfacial
tension between the cleaning ingredients and target soil.
| Scrubless Floor
Stripper - 1 |
| Ingredients: |
Wt.% |
| Water |
64.9 |
| Sodium Hydroxide, 50% (1) |
3.0 |
| Potassium Hydroxide, 45% (1) |
2.5 |
| Sodium Silicate, "N"
Clear (1) |
7.5 |
| Na4EDTA, 38% |
2.0 |
| Nonylphenol 9.5ETO |
1.0 |
| Sodium Xylene Sulfonate, 40% |
4.0 |
| Monoethanolamine (2) |
5.0 |
| Ethyleneglycol monobutylether (3) |
2.0 |
| Diethyleneglycol monobutylether (3) |
8.0 |
| Masurf
FS-1725 |
0.1 |
| Procedure: |
Mix in order listed.
| (1) Mixtures of Sodium
and Potassium contribute to improved stability of
highly alkaline, built formulations. |
| (2) Monoethanolamine breaks
the "zinc interlock" in high durability
floor finishes |
| (3) Mixtures of solvents
for softening of "burnished" floor finishes |
|
When formulating Hard Surface cleaners, the acronym "TACT"
should be kept in mind: T (Time), A (Agitation), C (Concentration)
and T (Temperature). Leverage any component of TACT for improved cleaning
performance and efficiency. MASURF FS-1725 is effective at reducing
the required contact time (T) by increasing wetting performance and
penetration, and increasing the effective concentration (C) by lowering
the interfacial tension between the detergent surfactants, monoethanolamine,
solvents and the polymer floor finish.
| Scrubless Floor
Stripper - 2 |
| Ingredients: |
Wt.% |
| Water |
64.9 |
| Sodium Hydroxide, 50% (1) |
3.0 |
| Potassium Hydroxide, 45% (1) |
2.5 |
| Sodium Silicate, "N"
Clear (1) |
7.5 |
| Na4EDTA, 38% |
2.0 |
| Nonylphenol 9.5ETO |
1.0 |
| Sodium Xylene Sulfonate, 40% |
4.0 |
| Monoethanolamine (2) |
5.0 |
| Ethyleneglycol monobutylether (3) |
2.0 |
| Diethyleneglycol monobutylether (3) |
8.0 |
| Masurf
FS-1825 |
0.1 |
| Procedure: |
Mix in order listed.
| (4) Mixtures of Sodium
and Potassium contribute to improved stability of
highly alkaline, built formulations. |
| (5) Monoethanolamine breaks
the "zinc interlock" in high durability
floor finishes |
| (6) Mixtures of solvents
for softening of "burnished" floor finishes |
|
When formulating Hard Surface cleaners, the acronym "TACT"
should be kept in mind: T (Time), A (Agitation), C (Concentration)
and T (Temperature). Leverage any component of TACT for improved cleaning
performance and efficiency. MASURF FS-1825 is effective at reducing
the required contact time (T) by increasing wetting performance and
penetration, and increasing the effective concentration (C) by lowering
the interfacial tension between the detergent surfactants, monoethanolamine,
solvents and the polymer floor finish.
| "Porta-San" Deodorizer
Concentrate |
| Ingredients: |
Wt.% |
| Aqueous Phase - |
| Water |
64.50 |
| Maquat
CS 428 |
20.00 |
| Isopropyl Alcohol |
4.00 |
| Acid Blue #9 |
0.75 |
| Fragrance/Oil Phase- |
| Citronella Oil |
3.00 |
| d-Limonene |
3.00 |
| Ethyleneglycol monophenylether |
.75 |
| Procedure: |
| Mix ingredients thoroughly in order listed.
Add pre-mixed oil phase to pre-mixed aqueous phase. |
| Components should mix "clear" in all proportions. |
| Dilute 1 ounce concentrate per gallon of
water. |
Natural Citronella and d-Limonene are safe and effective deodorizer
ingredients in this formulation.
| Effective Ready-to-Use
Deodorizer |
| Ingredients: |
Wt.% |
| Aqueous Phase- |
| Water |
94.0 |
| Maquat
CS 428 |
0.6 |
Isopropyl Alcohol
|
3.0 |
| SolventPhase- |
| Surfonic N95 |
1.0 |
| Isopropyl Alcohol |
1.0 |
| Fragrance |
0.4 |
| Procedure: |
| Mix ingredients thoroughly in order listed.
Add pre-mixed oil phase to pre-mixed aqueous phase. |
| Components should mix "clear" in all proportions.
If necessary, increase N95 by 0.5% increments to solubilize
fragrances for clear solutions. |
| Use "as is." |
Spray directly on odor causing soils as a cleaning pre-step or as
an ongoing odor control product.
| Mild Commercial
Strength Hand Soap |
| Ingredients: |
Wt.% |
| Water |
79.07 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
R-4 (1) |
0.5 |
| Macat
AO-12 |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| Macat AO-12 is an effective foam booster
in this pH neutral, mild hand soap. |
| (1) PEG-4 Rapeseedamide |
| (2) Added oily soil release |
| (3) Adjust pH to skin mild 6-7 |
| (4) Build viscosity |
| Mild Commercial
Strength Hand Soap - 2 |
| Ingredients: |
Wt.% |
| Water |
75.77 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
CO (1) |
2.5 |
| Oleic Acid |
1.3 |
| Macat
AO-12 |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
Masamide CO-Extra is an effective grease
cutter and emulsifier in this effective,
yet mild hand
cleanser.
| (1) Cocamide DEA |
| (2) Added oily soil release |
| (3) Adjust pH to skin mild
6-7 |
| (4) Build viscosity |
|
| Grease Cutting
and Particulate Soil Lifting Liquid Dish Detergent |
| Ingredients: |
Wt.% |
| Water |
77.25 |
| Nonylphenol 9.5 ETO |
12.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Masamide
R-4 |
1.5 |
| Macat
AO-12 |
4.0 |
| Citric acid |
0.25 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| Macat AO-12 contributes foam boosting and
grease cutting performance in this commercial grade particulate
soil liquid dish formulation. |
| Restroom Hard
Surface Foaming Cleaner |
| Ingredients: |
Wt.% |
| Water |
80.0 |
| Hydroxyacetic acid |
7.5 |
| Sulfamic acid |
2.5 |
| Macat
AO-12 |
10.0 |
| Notes: |
| Mix in order listed. |
| Under acidic conditions, Macat AO-12 exhibits
weakly cationic activity for enhanced cleaning of ceramic
surfaces. |
| Restroom Hard
Surface Foaming Cleaner w/Bleach |
| Ingredients: |
Wt.% |
| Water |
65.75 |
| Carbopol 676 (1) |
1.25 |
| Potassium hydroxide, 45% |
5.00 |
| Potassium silicate 2:1, 39% |
5.00 |
| Potassium carbonate |
5.00 |
| Sodium hypochlorite, 12.5% |
8.00 |
| Macat
AO-12 |
10.0 |
| Notes: |
| Mix in order listed. |
| Thickened formulation for increased contact
time and effectiveness. |
| (1) BFGoodrich Specialty Chemicals |
| Economical Shampoo |
| Ingredients: |
Wt.% |
| Water |
78.07 |
| Ammonium Lauryl Sulfate, 30% |
10.0 |
| Ammonium Lauryl Ether Sulfate, 60% |
5.0 |
| Macat
Ultra CG |
2.0 |
| Masamide
CO (1) |
1.5 |
| Citric acid (2) |
0.08 |
| Ammonium Sulfate (3) |
0.35 |
| Sodium Citrate (3) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
Masamide CO is an effective foam booster
in this pH neutral, mild shampoo.
| (1) Cocamide DEA |
| (2) Adjust pH to skin mild
6-7 |
| (3) Build viscosity |
|
| Low pH Conditioning
Shampoo for Damaged Hair |
| Ingredients: |
Wt.% |
| Water |
55.0 |
| Ammonium Lauryl Sulfate, 30% |
40.0 |
| Macat
Ultra CDO |
5.0 |
| Citric acid |
to pH 4-5 |
| Sodium Chloride |
to max viscosity |
| Dyes, Fragrance, Etc. |
q.s. |
| Notes: |
| Mix in order listed. |
| Clear shampoo at pH 4-5 with initial viscosity
of 5,100 cps, building to 16,500 cps with 0.4% salt. By
comparison, Lauramine oxide yields a low viscosity cloudy
solution. |
| Mild Degreasing
Hand Soap |
| Ingredients: |
Wt.% |
| Water |
89.07 |
| Macat AEC |
5.0 |
| Masamide
R-4 (1) |
0.5 |
| Macat
AO-14 |
1.0 |
| Diethyleneglycol butylether (2) |
1.0 |
| Citric acid (3) |
0.08 |
| Ammonium Sulfate (4) |
0.35 |
| Sodium Citrate (4) |
3.0 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| (1) PEG-4 Rapeseedamide |
| (2) Additional oily soil release |
| (3) Adjust pH to skin mild 6-7 |
| (4) Build viscosity |
| Shower and Tub
Foaming Cleaner w/Bleach |
| Ingredients: |
Wt.% |
| Water |
86.4 |
| Macat AEC |
3.5 |
| Macat
AO-14 |
0.5 |
| Fragrance |
0.1 |
| Sodium Hydroxide, 50% |
1.0 |
| Sodium Chloride |
0.5 |
| Sodium Hypochlorite, 12.5% |
8.0 |
| Notes: |
| Mix in order listed. |
| Increased viscosity from Macat AEC/Macat
AO-14 combination for increased contact time and effectiveness. |
Formulation Guidelines
We find the best way to utilize Macat AEC in hypochlorite cleaners is
to follow this order of addition:
- Charge water to the vessel
- Add Macat AEC and other surfactants/ingredients
- Add NaOH (if even to neutralize the Macat AEC)
- Finally, add hypochlorite solution
When we try to troubleshoot for a customer, we typically like to know
- The concentration of the hypochlorite
- Quality of the hypochlorite used
- Concentration and ratios of Macat AEC used in the formulation
As most formulators have learned, when formulating with hypochlorite,
the greater the initial hypochlorite concentration the greater its
fall. We characterize the quality of the hypochlorite in the market
as relating to the NaCl and NaOCl content. An acceptable standard
quality of approx. 130 - 150 g/L NaOCl with approx. 13 - 15% of NaCl
is recommended. Generally, the higher the content of NaCl in the hypochlorite
solution the lower the phase stability of the resultant formulation.
We have found that some formulations, and in particular the solubilizing
of some fragrances, benefit from a blend of Macat AEC surfactants. This
is perhaps where we can help if the TFC-S doesn't perform alone.
| High Caustic
CIP Formulation |
| Ingredients: |
Wt.% |
| Water |
52.9 |
| Macat AEC |
1.0 |
| Masurf
FS-710 (1) |
0.1 |
| Sodium Hydroxide, 50% |
16.0 |
| Sodium Hypochlorite, 12.5% |
30.0 |
| Notes: |
| Mix in order listed. |
| (1) Masurf FS-710 is a low foam fluorosurfactant
wetting agent for enhanced performance. |
Formulation Guidelines
We find the best way to utilize Macat AEC in hypochlorite cleaners is
to follow this order of addition:
- Charge water to the vessel
- Add Macat AEC and other surfactants/ingredients
- Add NaOH (if even to neutralize the Macat AEC)
- Finally, add hypochlorite solution
When we try to troubleshoot for a customer, we typically like to know
- The concentration of the hypochlorite
- Quality of the hypochlorite used
- Concentration and ratios of Macat AEC used in the formulation
As most formulators have learned, when formulating with hypochlorite,
the greater the initial hypochlorite concentration the greater its
fall. We characterize the quality of the hypochlorite in the market
as relating to the NaCl and NaOCl content. An acceptable standard
quality of approx. 130 - 150 g/L NaOCl with approx. 13 - 15% of NaCl
is recommended. Generally, the higher the content of NaCl in the hypochlorite
solution the lower the phase stability of the resultant formulation.
We have found that some formulations, and in particular the solubilizing
of some fragrances, benefit from a blend of Macat AEC surfactants.
| VOC-Free High
Alkaline Degreaser |
| Ingredients: |
Wt.% |
| Water |
76.8 |
| Potassium Hydroxide, 45% |
20.0 |
| Sodium Gluconate |
0.2 |
| Triethanolamine |
0.4 |
| Macat AEC |
2.0 |
| Masurf
NRW (1) |
0.5 |
| Masurf
FS-710 (2) |
0.1 |
| Notes: |
| Mix in order listed. |
| (1) Masurf NRW is a non-VOC high performance
wetting agent. |
| (2) Masurf FS-710 is a low foam fluorosurfactant
wetting agent for enhanced performance. |
Formulation Guidelines
We find the best way to utilize Macat AEC in hypochlorite cleaners is
to follow this order of addition:
- Charge water to the vessel
- Add Macat AEC and other surfactants/ingredients
- Add NaOH (if even to neutralize the Macat AEC)
- Finally, add hypochlorite solution
When we try to troubleshoot for a customer, we typically like to know
- The concentration of the hypochlorite
- Quality of the hypochlorite used
- Concentration and ratios of Macat AEC used in the formulation
As most formulators have learned, when formulating with hypochlorite,
the greater the initial hypochlorite concentration the greater its
fall. We characterize the quality of the hypochlorite in the market
as relating to the NaCl and NaOCl content. An acceptable standard
quality of approx. 130 - 150 g/L NaOCl with approx. 13 - 15% of NaCl
is recommended. Generally, the higher the content of NaCl in the hypochlorite
solution the lower the phase stability of the resultant formulation.
We have found that some formulations, and in particular the solubilizing
of some fragrances, benefit from a blend of Macat AEC surfactants.
| 1:20 Low Foam
Cleaner Concentrate |
| Ingredients: |
Wt.% |
| Water |
49.0 |
| Sodium Metasilicate, pentahydrate |
5.0 |
| TKPP, 40% |
35.0 |
| Masurf
NF-10 |
11.0 |
| Notes: |
| Mix in order listed. |
| Cloud point 93°C |
| Typical base formula for use as a soak,
spray or power scrub cleaner. |
| Automatic Dishwashing
Liquid |
| Ingredients: |
Wt.% |
| Water |
49.0 |
| Montmorillonite clay |
3.0 |
| Sodium Hydroxide, 50% |
1.5 |
| Sodium Metasilicate, pentahydrate |
8.0 |
| Sodium Carbonate |
3.0 |
| TKPP, 40% |
25.0 |
| Sodium Hypochlorite, 12% |
8.5 |
| Masurf
NF-10 |
2.0 |
| Notes: |
| Mix Montmorillinite clay in 60°C water.
Add sodium hydroxide, sodium metasilicate, sodium carbonate
and tetrapotassium pyrophosphate with agitation. Cool
to ambient temperature, add sodium hypochlorite and Masurf
NF-10. Agitate until uniform. |
| Low Temperature
Metal Cleaning Concentrate |
| Ingredients: |
Wt.% |
| Water |
81.4 |
| Sodium Carbonate,monohydrate |
3.0 |
| Sodium Hydroxide, 50% |
1.0 |
| Sodium Metasilicate, pentahydrate |
2.0 |
| Borax |
0.3 |
| Cobratec TT-100 |
0.3 |
| Masurf FAP-112 |
0.5 |
| Dequest 2000 |
1.0 |
| Neodol 91-6 |
2.0 |
| Masurf
NRW |
2.0 |
| Masurf
1250 |
6.5 |
| Notes: |
| 1:10 Concentrate
for low temperature (70-90°F) solution metal cleaning
w/corrosion inhibitors. |
Cobratec TT-100, Tolytriazole: corrosion
inhibitor, PMC Specialties Group, Inc.
Masurf FAP-112, Functionalized Anionic Polymer: anti-precipitating
agent Dequest 2000, Amino tri (methylene- phosphonic acid):
chelating agent, Solutia Neodol 91-6, C9-11 6ETO: nonionic
surfactant, Shell Masurf NRW, Anionic Non-Rewetting Surfactant
Masurf 1250, High Performance Hydrotrop |
| Non-Streak Multi-Surface
Cleaner |
| Ingredients: |
Wt.% |
| Water |
96.3 |
| Na4EDTA, 38% |
0.1 |
| Macat
AO-12 |
0.4 |
| Glycerin (1) |
0.2 |
| Monoethanolamine (2) |
0.4 |
| Masurf
NRW |
0.5 |
| Isopropanol |
2.0 |
| Masurf
FS-615 (3) |
0.1 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| (1) Provides slip for easy wiping. |
| (2) Provides alkalinity for grease cutting
performance. |
| (3) Fluoroaliphatic Sulfosuccinate Fluorosurfactant
for fast wetting and synergistic non-streak performance
with Masurf NRW. |
| Ready to Use
Grease Cutting Multi-Surface Disinfectant Cleaner
Maquat 86-M/EPA Registration Number 10324-85* |
| Ingredients: |
Wt.% |
| Water |
96.148 |
| Na4EDTA, 38% |
0.079 |
| Macat
AO-12 |
0.4 |
| Maquat MQ615M |
0.172 |
| Glycerin (1) |
0.2 |
| Monoethanolamine (2) |
0.4 |
| Masurf
NRW-N |
0.5 |
| Isopropanol |
2.0 |
| Fragrance |
0.1 |
| Dye |
0.001 |
| Notes: |
| Mix in order listed. |
| (1) Provides slip for easy wiping. |
| (2) Provides alkalinity for grease cutting
performance. |
| * Contact Mason Chemical Regulatory Services
for complete Registration Package. |
Maquat 86-M is a Disinfectant, Cleaner, Mildewstat, Fungicide, Sanitizer
(nonfood contact surfaces) Virucide, Deodorizer for Hospitals Nursing
Home, Whirlpool, Home, Institutional, Industrial, School, Dairy, Equine,
Poultry/Turkey, Farm, Veterinary, Restaurant, Food Handling and Process
Areas, Federally Inspected Meat and Poultry Plants, Bar and Institutional
Kitchen Use and for Harvesting & Handling Equipment.
Maquat 86-M is registered for use in Kitchens and for Household Cleaning,
and as a Non-Acid Bathroom Cleaner. Formulated for effective Poultry
Sanitation, Swine Premise Sanitation, and Mushroom Farm Sanitation
Maquat 86-M is effective against a wide range of food borne pathogenic
bacteria such as Escherichia coli 0157:H7, is fungicidal against Trichopyton
mentagrophytes (the agent that causes athlete's foot fungus), and
virucidal against blood borne pathogens such as Hepatitis B Virus,
and HIV-1 (AIDS virus).
| Non-Streak Glass
& Window Cleaner |
| Ingredients: |
Wt.% |
| Water |
94.38 |
| Na4EDTA, 38% |
0.1 |
| Macat
AO-12 |
0.4 |
| Glycerin (1) |
0.2 |
| Monoethanolamine (2) |
0.4 |
| Masurf
NRW-N |
0.5 |
| Isopropanol |
4.0 |
| Masurf
FS-230 (3) |
0.02 |
| Dye & Fragrance |
q.s. |
| Notes: |
| Mix in order listed. |
| (1) Provides slip for easy wiping. |
| (2) Provides alkalinity for grease cutting
performance. |
(3) Fluorosurfactant for fast wetting and
synergistic no-streak performance with
Masurf NRW-N. |
| Clear Conditioning
Shampoo |
| Ingredients: |
Wt.% |
| Water |
to 100.00 |
| Sodium laureth-2 sulfate (28%) |
10.0 |
| Masurf
Ultra CG |
3.0 |
| Masurf
G-2C |
2.0 |
| Maquat
SL-5 |
0.5 |
| Citric acid |
for pH 6-6.5 |
| Fragrance |
q.s |
| Extracts/Oils |
q.s |
| Preservative |
q.s |
| Procedure: |
| Charge materials into water with agitation
in order listed. |
| Adjust pH to 6-6.5 with citric acid. |
| Add Fragrance, Extracts/Oils such
as Aloe Vera, Chamomile and Jojoba, and Preservative. |
| Adjust viscosity with sodium chloride. |
|
Safety/Toxicology/Ecotoxicology/Regulatory
Information
Masurf G-2C is a non-sensitizer (CCET Method), non-mutagenic (OECD
471, TA98, TA100, TA1535, TA1537, TA1538), non-toxic: LD50 >2000 mg/kg
(92/69/ECC), non-irritating for both skin and eye (93/21/CEE, OECD
404, 405), is biodegradable: >60% in 28 days (OECD 301B), and exhibits
low Ecotoxicity: Fish LC50(96 hours) >10mg/L (OECD 203).
Masurf G-2C is found on the complies with the requirements of the
following chemical inventories: US (TSCA, FIFRA), Canada (DSL), Australia
(AICS), Korea (ECL).
See Material Safety Data Sheet for additional information.
| Insect Removing
Glass Cleaner |
| Ingredients: |
Wt.% |
| Water |
82.0 |
| Potassium Hydroxide, 45% |
2.0 |
| Gluconic acid |
3.0 |
| Macat
LFB |
2.0 |
| Macat
AO-8 |
6.0 |
| Monoethanolamine |
5.0 |
| Note: |
| Mix in order listed. |
| Cleansing Foam |
| Ingredients: |
Wt.% |
| Water |
79.07 |
| Macat
LFB |
10.0 |
| Masurf
G-2C |
1.0 |
| Masamide
R-4 |
0.5 |
| Citric acid |
0.08 |
| Dye, Fragrance, Preservative |
q.s. |
| Note: |
| Mix in order listed. |
| INCI Names: |
| Macat LFB (Capryl/Capramidopropyl Betaine),
Masurf G-2C (Glycereth-2 Cocoate), Masamide R-4 (PEG-4
Rapeseedamide) |
| Non-Streak Glass & Window Cleaner |
| Ingredients: |
Wt.% |
| Water |
94.13 |
| Na4EDTA, 38% |
0.1 |
| Macat AO-12 |
0.4 |
| Glycerin (1) |
0.2 |
| Monoethanolamine (2) |
0.4 |
| Ethyleneglycol monobutyl ether (3) |
0.25 |
| Isopropanol |
4.0 |
| Masurf FS-1520 (4) |
0.02 |
| Dye & Fragrance |
q.s. |
| Procedure: |
Mix in order listed. |
| Provides slip for easy wiping |
| Provides alkalinity for grease cutting performance. |
| Grease-cutting solvent (also consider hexanol). |
| High-performance wetting and leveling agent to maintain surface tension during dry-down. |
|
|
|
|
|
| |
| |
|
